Replacing JC's model with an existing model
Replacing JC's model with an existing model
Hi. I'm wondering if there is a way I can replace JC Denton's model specifically, maybe by making his code call for another model (or choose from the models ingame to use as my singleplayer model)
I'm aware of Unrealistic, but the issue with that is that it makes nearly every weapon in the game 2shot you, which gets in the way of pretending to be a cop or something.
Is there a way to load a different playermodel (ala unrealistic setting it to a mp server, loading your mp model, but still playing sp missions) only without the AI having full explosive weaponry? Perhaps through changing JC's model itself to an existing one (Avoids dealing with unrealistic), or finding a way to call for a multiplayer model on lower difficulties, or if it's simply as possible as loading an unrealistic game, setting the difficulty lower, and avoiding the issue as simple as that.
Thanks in advance.
I'm aware of Unrealistic, but the issue with that is that it makes nearly every weapon in the game 2shot you, which gets in the way of pretending to be a cop or something.
Is there a way to load a different playermodel (ala unrealistic setting it to a mp server, loading your mp model, but still playing sp missions) only without the AI having full explosive weaponry? Perhaps through changing JC's model itself to an existing one (Avoids dealing with unrealistic), or finding a way to call for a multiplayer model on lower difficulties, or if it's simply as possible as loading an unrealistic game, setting the difficulty lower, and avoiding the issue as simple as that.
Thanks in advance.
Re: Replacing JC's model with an existing model
Hm? If I get this right.. this sounds pretty simple..
This might sound complicated but it is infact easy.
Firstly install this just by placing the file on the 'System' folder.
Now here's what's you're gonna do.. normally mutators are only for Multiplayer but you can make them work on singleplayer. To do that, you just have to summon them.
So enable cheats, and type this command:
and now you're done, you can now execute commands written on the ReadMe of that mod.
so you'll just have to execute this command now;
and you're done.
Hope it helped and that I wasn't too late.
This might sound complicated but it is infact easy.
Firstly install this just by placing the file on the 'System' folder.
Now here's what's you're gonna do.. normally mutators are only for Multiplayer but you can make them work on singleplayer. To do that, you just have to summon them.
So enable cheats, and type this command:
Code: Select all
summon MMSkinsV01.SkinsMutator
so you'll just have to execute this command now;
Code: Select all
mutate skin.police
Hope it helped and that I wasn't too late.
- bjorn98009_91
- Silhouette
- Posts: 688
- Joined: Thu May 08, 2008 8:17 am
- Location: Hufvudstaden, Sweden
- Contact:
Re: Replacing JC's model with an existing model
Actually it's possible to do it all via the console, like set jcdentonmale mesh deusexcharacters.gm_jumpsuit and then set the skins one for one. However it's painful, and annoying. If the mod ~DJ~ posted above works then that's awesome ^^ If not I could probably code something for you really quickly that executes the console commands I mentioned.
If you are running with Shifter it might be possible to invoke that character selection screen anyways. Not sure.
If you are running with Shifter it might be possible to invoke that character selection screen anyways. Not sure.
Producer and Quality Assurance Manager for Deus Ex: Revision.
Re: Replacing JC's model with an existing model
That mutator works, for the most part. The head textures are a bit strange, and it's missing a lot of really essential skins like the UNATCO trooper, bums, etc.
What Shifter basically does is it removes multiplayer, but adds a lot of multiplayer models. Unrealistic is more or less a would-be multiplayer mode and it uses whatever multiplayer model you have selected at the time.
Either of these would work fine. I think calling the character select screen would probably be the most useful of the two however if you can make it use the models in SP.bjorn98009_91 wrote:Actually it's possible to do it all via the console, like set jcdentonmale mesh deusexcharacters.gm_jumpsuit and then set the skins one for one. However it's painful, and annoying. If the mod ~DJ~ posted above works then that's awesome ^^ If not I could probably code something for you really quickly that executes the console commands I mentioned.
If you are running with Shifter it might be possible to invoke that character selection screen anyways. Not sure.
What Shifter basically does is it removes multiplayer, but adds a lot of multiplayer models. Unrealistic is more or less a would-be multiplayer mode and it uses whatever multiplayer model you have selected at the time.
- bjorn98009_91
- Silhouette
- Posts: 688
- Joined: Thu May 08, 2008 8:17 am
- Location: Hufvudstaden, Sweden
- Contact:
Re: Replacing JC's model with an existing model
Getting the screen to work would probably be more work, but haven't looked at the code so I'm not sure what's going on there.
Maybe ~DJ~ will beat me to it, I have a lot to do.
Maybe ~DJ~ will beat me to it, I have a lot to do.
Producer and Quality Assurance Manager for Deus Ex: Revision.
Re: Replacing JC's model with an existing model
Alright, looked at the Mutator's code.. it's.. not that good. I suppose it was made only for Multiplayer and that it already assumes our default textures for UNATCO or NSF, basically TDM.
Okay so forget the Mutator, let's just stick to some very useful command(s).
So here's a video on what to do, please watch this.
Here are the instructions;
1) Firstly, open up Deus Ex and load your save-game.
2) Now, go Half-Screen by pressing 'ALT+ENTER'
3) Enable cheats
4) Summon a character from which you want skin of.. for example, riotcop, so you type:
5) Type this command next:
This will open the menu as shown in the video. Keep in mind, for me, it says 'MTLJCDenton', that is because I have DXMTL installed which is a Multiplayer mod, so don't worry about that.. I assume it'll say 'JCDentonMale' for you.
6) Now open up the menu for the character you've just summoned, so you'll type:
7) Now keep both the menus side-by-side and open up the 'Display' sub-menu of both the menus, and copy the following from 'RiotCop' menu:
and paste it to your 'Human' menu, as in, 'JCDentonMale'.
8 ) Now just close both of the menus, and go Full-screen again by pressing ALT+Enter, and now you're done!
Okay so forget the Mutator, let's just stick to some very useful command(s).
So here's a video on what to do, please watch this.
Here are the instructions;
1) Firstly, open up Deus Ex and load your save-game.
2) Now, go Half-Screen by pressing 'ALT+ENTER'
3) Enable cheats
4) Summon a character from which you want skin of.. for example, riotcop, so you type:
Code: Select all
summon RiotCop
Code: Select all
EditActor class=Human
6) Now open up the menu for the character you've just summoned, so you'll type:
Code: Select all
EditActor class=RiotCop
Code: Select all
Mesh
Multiskins
Texture
Skin
8 ) Now just close both of the menus, and go Full-screen again by pressing ALT+Enter, and now you're done!
Re: Replacing JC's model with an existing model
Hm. That does give me an idea. I can probably look up how to edit JC's class file or something and just replace what's in there with the models of another character every time I want to play as someone new. Takes care of the "temporary" issue and is basically functionally identical to Unrealistic.
Re: Replacing JC's model with an existing model
Basically, go into the deus ex core files and replace the text for JC's model with that of another one, IE, a riot cop. Since JC's default model then refers to a model I want to play as, it would permanently call for those models and I could just load up a game and go.
Re: Replacing JC's model with an existing model
..what's wrong with using the above mentioned method? You'll only have to do it once and can 'save'..?
Re: Replacing JC's model with an existing model
Actually, that method seems to reset when you load or save. It's perfect otherwise.
What I'm trying to do right now is edit the .uc from here (http://www.offtopicproductions.com/tack ... Class.html) but I can't seem to find out how to open it in Deus Ex Editor (let alone have it appear in mod loader)
What I'm trying to do right now is edit the .uc from here (http://www.offtopicproductions.com/tack ... Class.html) but I can't seem to find out how to open it in Deus Ex Editor (let alone have it appear in mod loader)
Re: Replacing JC's model with an existing model
while no one wants to think about their belongings being damaged or lost during a move, it's important to understand what level of liability coverage you have and how the claims process works. By documenting everything and following the proper procedures, you can ensure that you receive fair compensation for any damage or loss that may occur. Characters: Car Shipping Rates Corinth
Re: Replacing JC's model with an existing model
With Coolbreezehq, you can easily organize your work and keep track of tasks, deadlines, and progress. The platform is intuitive and user-friendly, making it easy to use for anyone, regardless of their technical expertise. this link
-
- Thug
- Posts: 19
- Joined: Wed Jun 28, 2023 12:02 am
Re: Replacing JC's model with an existing model
Vous pouvez désormais convertir vos vidéos YouTube préférées au design MP3 sur n'importe quel appareil, y compris votre cell phone, tablette ou ordinateur. Promote ce dont vous avez besoin est un convertisseur MP3 fiable et sécurisé comme videoconvertisseur. videoconvertisseur.com
-
- Thug
- Posts: 19
- Joined: Wed Jun 28, 2023 12:02 am
Re: Replacing JC's model with an existing model
DESIGNED WITH THE SAME WINNING INTENT AS OUR MOTORCYCLES, KTM POWERWEAR ALLOWS YOU TO GEAR UP FOR THE EXTREMES AND LIVE READY TO RACE. honda leather motorcycle jacket